Best Miter Saw for Homeowner: Review and Buying Guide

A workshop isn’t complete until it has a miter saw. A miter saw is a power tool that makes a variety of angled cuts. The best miter saw will make cuts for crown moldings, door frames, window casings easily. Hobbyists and do it yourselfers are always looking for the best tools to make their renovation projects faster, safer and easier and this article will identify a list of the best miter saws that money can buy.

Types of Miter Saws

There are three types of miter saws: the compound miter saw, with blades that pivot left and right and tilt in a single direction for bevelled cuts. The dual compound mitre saw can tilt both left and right for quicker cuts. A sliding compound miter saw can cut longer pieces of material.

What Makes The Best Miter Saw For The Money?

There are hundreds of different miter saws on the market, from a variety of maufacturers. The best mitre saw for the money and the best mitre saw for the DIYer may include some of these features:

  • Blade size – while the most common blade is 8 inches, larger blades will allow you to make longer cuts.
  • Laser guides – they project a beam onto the work piece helping guide your cuts.
  • Cutting power – the higher amps means more cutting power.
  • Electric brakes – they help the blade stop turning much quicker, in as little as two seconds.
  • Blade guards – cover the blade when not in use, but articulate when pushing the material through the cut.
  • Table extensions – connect to the sides of your saw and make cutting longer pieces of material possible.
  • Dust chutes, dust bags and blowers – help keep your work area clean and clear of debris.
  • Depth stops – allow you to adjust the height of the blade, thus allowing you to control how deep the blade cuts into your material.
  • Saw size – smaller and lighter models may give you increased portability and make transferring the saw from different work sites easier, but they may lack some of the best features and functionality some of the heavier models may include. If you are planning to only use the miter saw in one location, like your personal work room, then you may opt for a larger model.

Top 5 Best Selling Miter Saws of 2018

We are going to list top 5 best selling miter saws after considering lot of customer reviews & based on our personal experience. We hope these will definitely help you choosing the best miter saw at the market.

  • Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw
  • Hitachi C10FCH2 15-Amp 10-inch Miter Saw
  • DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw
  • Homecraft H26-260L 10-Inch Compound Miter Saw by Delta Power Tools
  • Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw

1- Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw

Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw Review

Looking for the best miter saw for the money ideal for cramped workshops and job sites? Checking miter saw reviews is a good starting point. But with all the choices in miter saws today, what miter saw really provides the best combination of power, portability, price, accuracy, and cut capacity? Undoubtedly, the Bosch CM12SD 120-Volt 12-Inch Dual-Bevel Glide Miter Saw is one of the best miter saws on the market. The saw features a space-saving design, accurate performance, and a smooth cutting action. That’s not all! When you purchase this saw, you get a soft-grip ambidextrous handle, vacuum adaptor, and a dust chute for greater user comfort. Additionally, the saw provides easy-to-read miter scales, easy-access upfront controls, and a large cutting capacity.

What’s in the package?

1. Compact Axial-Glide System

No matter how small your workspace is, the innovative Bosch GCM12SD saw can deliver great cutting action. Axial-Glide system creates smooth cuts and offers enhanced alignment and wider cross-cuts. The exclusive, advanced glide system takes up less cutting space and ensures that you have full control over the saw’s gliding function.

2. Powerful Motor

The Bosch 120-Volt miter saw is useful for a range of cuts. It is quick, accurate, convenient, and versatile. The saw’s 15 amp motor precisely cuts into many materials at speeds of 3,800 RPM. For further flexibility, the tool is compatible with a range of 12-inch blades and it features a clear-lower guard that provides unobstructed cut-line visibility. Also, the saw features 2 sliding integrated base extensions which provide adjustable support for wider and longer materials.

3. Quick-Release Squarelock Fences

Squarelock quick-release fences provide easy, precise alignment. These non-adjustable, high-precision fences perfectly align to the saw’s table at 90-degree angle. In addition, these quick-release fences use a one-touch lock/unlock feature which allows you to easily – and perfectly – position each fence for accurate material alignment.

4. Marked Detents and Up-Front Bevel Controls

The saw’s all-metal range selector and bevel lock lever enable the user to easily adjust the bevel. The bevel capacity cuts at angles of 0 to 47 degrees to the right and the left, while roof pitch angles and marked detents make it easy for you to set the most common angles. In addition to the high-visibility dual-bevel scale, the saw comes with detents at 0, 40, and 45-degrees for both right- and left-facing cuts

What you’ll love about this miter saw

  • Bosch miter saw is durable, accurate and user-friendly.
  • The belt driven saws are quieter, making the machine more ear-friendly.
  • The saw is easy and safe to use thanks to the 2 safety switches on top of its handle.
  • If you are a novice, the Laser-DIM feature enables quick, accurate cutting action.
  • The machine has a dust collection system.

Flaws of the Bosch DB Miter Saw

  • The saw is very heavy.
  • Terrible at handling saw dust.
  • The table is not perfectly flat.

With the miter saws, like Bosch GCM12SD 120-Volt 12-Inch DB Glide Miter Saw, you’re going to be able to complete project after project a lot easier and faster. When shopping for the best miter saw, be sure to consider factors like dust collection, cut quality, slide action, power, lasers, depth-of-cut limits, and handle switch.

 

2- Hitachi C10FCH2 15-Amp 10-inch Review

Hitachi C10FCH2 15-Amp 10-inch Review

Hitachi C10FCH2 saw is among best miter saw the interesting tool when you require versatility with your cutting needs. This tool has many features and has a powerful 15 amp motor with 500 rpm speed that makes functions quick. The tool makes a professional cutting with finish precision whether you’re making miter cuts or cross cuts could be experienced with this compound saw by Hitachi. This saw is truly easy to understand with simple operation and straightforward adjustments.

Main Features

Laser marker technology

The C10FCH2 is outfitted with a laser marker technology which guarantees users can accomplish perfect cuts each time they utilize the saw. The laser is just aligned with the marks on the piece work before the blade is set into motion giving exact cuts. The cuts will be on point as long as C10FCH2 users have their measurement adjust.

Compound feature

To guarantee accurate bevels and miters, the saw comes fitted with a thumb impelled positive miter which permits basic miter adjustments between 0 to 52 degrees. The edge of the cutting can without much of a stretch be changed effortlessly when trimming little pieces or managing crowns in a molding.

10 and half TCT saw blade

The saw blade is sufficiently long making the saw exceptionally versatile to handle all pieces of wood. The blade can gently trim any wood pieces accomplishing the coveted shapes and sizes.

Powerful 15 amp motor

This C10FCH2 feature makes it one of the strongest saw in the market at present empowering it to handle any cutting jobs. The saw is sufficiently powerful to cut through the strongest pieces of wood easily.

Dust collector

Dust accumulation can be an issue as the dust can take up your work space. However, with the incorporation of a dust collector, the job site is kept clean while valuable working space is spared.

Advantages

  • · A decent, powerful motor which guarantees the blade can handle a wide range of framework effortlessly. The blade can manage up to widths of 2 by 6 inches in only one single pass.
  •  It is light and portable making it simple to bear. Carpenters can without much of a stretch convey it starting with one job site then onto the next effortlessly since it is light.
  •  It is additionally exceptionally well built and sufficiently sturdy to withstand any toughest cutting.
  •  It has a standout amongst other miter stops which give an exceptionally positive feedback. The miter stops are for the most part simple and secure and can bolt any override.

Disadvantages

  • · The C10FCH2 laser is not that accurate out of the container. But, customers can adjust it to the blade on the left or right and stick to it all through the cuts for accuracy.

Hitachi C10FCH2 control saw is recommended to any client in the market in search of that perfect saw for wood works. It has been utilized by several individuals and given positive reviews with its several features that offer genuine esteem. It is very durable and can keep going for a considerable length of time. New customers can simply ahead and purchase with confidence knowing they have purchased a product that will serve them for quite a long time.

3- DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw review

You need the best miter saw for you to achieve perfect cuts at different angles. There are times when you need to make complicated shapes; you can easily cut wood into such shapes through the application of the best miter saws. DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter saw is among the best you can access in the market. It is made out of durable parts which make it a great addition to your home. Some of the great features of the miter saw include the following

Sharp and thin saw

From reading the best miter saw reviews, you will discover DEWALT DW715 is a great miter saw you can have. It performs very well due to its thin and shard saw. It cuts through hard wood with ease. If you like to achieve the best in your wood cutting process, then you need to invest in the miter saw. It is made to satisfy customer requirement when it comes to cutting intrigue shapes.

Comfortable to handle

The saw comes with features such as carbide blade, blade wrench, dust bag and comfortable side handles. Even if you have never used a miter saw before, you will be assured of great success after you decide to use the miter saw. It is designed with user experience in mind. It will offer you the best results you deserve in your wood cutting experience. The great durability and design make it very durable. It is hard for you to experience downtimes after you decide to apply the miter saw in your wood cutting process.

Miter detent override feature

The feature allows users to override the miter stops and adjust the saw to desired settings. The feature plays a crucial role in preventing the saw from slipping into the miter detents. You can accomplish different task due to the versatility of the saw. It is a great addition to your tools. With the saw, you can perform different projects within a short period.

Stainless steel miter detent plate can be adjusted with 11 positive stops

The saw allows easily adjustable. Different projects will require specific types of cuts, for you to achieve the best cuts; you need to adjust the miter saw accordingly. The saw allows you to adjust until you make different cuts. It has up to 11 positive stops to allow you achieve great success in your wood cutting process.

Tall sliding fences

The sliding fences support crown molding for up to 5-1/4-Inch. It can as well support nested and base molding for up to 6-1/2-Inch vertically against the fence. It easily slides out of the way for you to achieve bevel cuts. No wood working project you can’t accomplish after you decide to buy the miter saw. Other great features of the miter saw include crosscut capacity of up to 2×8-Inch dimensional lumber. The bevels to the left for up to 48 inches while the right up to 3 inches. It has the great design to eliminate override and twisting during your cutting experience. With the miter saw, you can’t regret. It has durable parts which assure you value for your money.

4- Homecraft H26-260L 10-Inch Compound Miter Saw by Delta Power Tools

Homecraft H26-260L 10-Inch Compound Miter Saw by Delta Power Tools Review

Homecraft H26-260L 10-Inch compound miter saw by delta power tools is the best miter saw you can have on the market. If you are looking for a miter saw which you can easily carry from one place the other in the room, then you should opt for the miter saw. There are some miter saws which can restrict you on the saw stand, but the miter saw is made in such a way it allows you to work on different saw stands. The manufacturers took the time to come up with the best miter saw which will allow you save money. It saves money because you can easily move it from one location to the other to accomplish different jobs.

Benefits of buying the best miter saw

Lightweight unit

When comparing different best miter saws, you will discover the miter saw is among the lightest which you can have. Moving it from one room to the other is easy. Cases, where you will be stressed when trying to accomplish different tasks in your workshop, will be no more after you buy the miter saw. It is a portable miter saw which has a great design to allow you accomplish different wood working projects.

Works with virtually all miter saw stands

It can be costly if you will have to invest in several miters saw stands for you to accomplish projects in your workshop, but the miter saw makes things easy for you. It can fit on a wide variety of miter saw stands so that you can work from any location in your workshop. It is necessary to check best miter saw reviews so that you can decide on the best, from reviews you will discover Homecraft H26-260L 10-Inch compound miter saw by delta power tools has excellent ratings from customers. It is a miter saw made to meet the highest standards so that you can be assured of great success in your wood working projects.

Spindle lock hold spindle securely

When working with a miter saw, it will reach a time when you will have to remove the blades. The design allows the spindle to lock and hold the spindle securely so that you can be assured of great success in your wood cutting projects. The system is very secure; it has safety features so that you can always work on the wood without any fear of the system exposing you to injuries. The capacity of the miter saw allows cutting nominal 4×4 and 2×6 at 90 degrees and 2×6 at bevel setting, with just one pass.

Ergonomic handle for safe, predictable operation

It is necessary for you to buy a miter saw which will allow you to operate in a secure environment. The miter saw is designed with great safety features so that you can be assured of great success in your wood cutting process. If you have been working on miter saws which keep letting you down, then you should buy the miter saw. It has great features to make your wood working operation run smoothly. It is a durable miter saw to assure you value for your money.

5- Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw

Evolution Power Tools RAGE3 10-Inch Multipurpose Cutting Compound Sliding Miter Saw reviews

If you are just starting out in woodwork or need to cut into certain materials and are not sure about what miter saw to purchase, this is just the article for you. When looking for a good miter saw there are some features that you should look out for and not compromise on. You should look for miter saws that have blades with the right depth, height and durability; blades with sufficient teeth to give the finest cut; appropriate dust elimination mechanisms; and proper sliding action. The Evolution Power Tools RAGE3 is one of the best miter saws on the market. Let us dive into a detailed review of this product to see if it lives up to its reputation.

Pros

The Evolution Power Tools RAGE3 has a 10 inch miter that can cut through a variety of materials such as wood, plastic and aluminum. It produces fast, clean and accurate cuts. Further to this, the miter saw does not create a lot of heat when cutting through metal which enables you to handle the material as soon as you have finished cutting it. This miter saw has an in-line handle that makes it the best miter saw for both left handed and right handed users. The Evolution Power Tools RAGE3 has a laser pointer that acts as a guide showing the exact point that the blade will make contact with the surface of the material you are about to cut. This increases the accuracy of the cut for the best results. Its cutting depth is easily adjustable which is convenient if you want to create grooves in the material that you are working on.

Cons

This miter saw weighs approximately 39 pounds, and is 30 by 20 by 25 inches in dimension. It comes with a 15.0AMPs motor that delivers 1800Watts of power through the miter saw. The blade has a maximum cutting width of about 12 inches at a 90 degree angle and a maximum cutting width of 8.25 inches at a 45 degree angle. In terms of the cutting depth capabilities of the miter saw, the maximum depth is 3 inches at a 90 degree bevel and a maximum of 1.5 inches at a 45 degree bevel which makes it one of the best miter saws. Finally this miter saw comes with a three years warranty and you should be sure not to purchase this saw without warranty.

Although the Evolution Power Tools RAGE3 has a lot of good qualities, it does have some minor design flaws and shortcomings. This is according to the best reviews of customers who have used these miter saws.The saw has less cutting accuracy witsh metals than wood because of the thickness of the blade, but this is mitigated greatly if you use the complimentary multi-purpose blade that comes with each purchase. This miter saw has a 1 inch arbor and this greatly puts a limitation on the choices of blades you can use. Finally the blades on this miter saw may require frequent sharpening especially when you are using it to cut through metal.

Other than that, the features on this tool are generally great and efficient and gets the Evolution Power Tools RAGE3 a well-deserved place on the list of the best miter saws.

Best Miter Saw for The Money

1. DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw 

DEWALT’s DWS780 undoubtedly looks intimidating to many people gave its numerous various parts and features. With its miter and bevel, this monster of a machine can be adjusted vertically and horizontally and both at the same time if needed. It can definitely make the complex cut a lot easier to do and because it can slide, it can cut further than regular ones without the slide. If you decide to buy one of these, here’s a breakdown of what you can expect from it:

Product Features

When ordered, expect to get the following items in your package:

  • Of course, the DEWALT DWS780 itself
  •  A Carbide Blade
  •  A Blade Wrench
  •  Dust bag
  •  A vertical material clamp

The whole machines weigh around 68 pounds. It really is a lot heavier than what you might expect but with this, you can further expect that it is one tough machine that would not break easily. This is perfect for those who have trouble keeping their hands steady while cutting. It features the new XPS which basically is one of the reasons it can cross cut properly. The LED at the back of the machine helps in casting a shadow to show you how you are actually cutting whatever material.

The durability is definitely one thing you can be sure of once you see the machine itself. Plus, if you change the blades, you would not even need to calibrate the alignment system. Spinning at 3800 RPM’s powered by a 15 amp motor, the machine will surely get even complex jobs done at your convenience. Speaking of convenience, the wiring is placed at the back end of the machine so that it would not be a hassle to keep a look out for it if ever it might get in the way. This then also prevents the wire from tangling.

The DEWALT DWS780 can cut 6.75 inches vertically, 13.875 inches horizontally, and 7.5 inches when nested. The back fence can cut a 2×12 when at an angle of 45 degrees and 2×16 if at 90 degrees.

Pros:

The pros of this machine have been pretty much explained in the previous paragraphs. It cuts simple and complicated materials easily; it looks and definitely is sturdier than most and; needs only little maintenance. You’ll have to forget about your shaky hands because, with this machine, it would not matter.

Cons:

It would be quite hard to store this. It weighs fairly heavy and it can’t be folded or made into a more compact version like a few other models can. Lastly, one of the biggest cons is its price as it usually costs around $600.

FAQ’s:

What do you advice when using the DWS780?

If you’re doing a larger task, better prepare a vacuum or dust collector. The dust bag they provide may not be enough.

Can the blades be replaced?

Of course, it can. Note that the blade they provide is better used for general construction works as it may not fare well when it comes to fine woodworking. If you plan on getting blades, make sure to match it with the kind of work you intend to do.

It’s too pricey. Is there at least a warranty?

Yes, it has a 3-year warranty and a 1-year free service contract. If you don’t like the item, you have 90 days to return it back.

2. Makita LS1016L 10-Inch Dual Slide Compound Miter Saw With Laser

The Makita LS1016L is a refreshed 10″ dual bevel slider with some remarkable improvements over the prepared LS1013 model. With an expanded limit of cutting crown moldings, the Makita LS1016L 10-Inch Dual Slide Compound Miter saw has earned the admiration of a significant number of its clients.

Product Features

1. 3200 rpm Motor

It has a motor of 15 amps that conveys a no-load speed of 3,200 rpm

2. Crown molding limit

It features a crown molding cutting limit of 6-5/8 inches (vertically settled)

3. Patented Sliding System

The saw additionally has a patented Four-Steel Rail Sliding System that further expands rigidity to deliver predominant cuts

4. Portable

The saw is easy to convey since there are the massive ergonomic rubber treated horizontal D-handle configuration handles on the base

5. Soft begin

The quiet begin is extraordinary; it truly gives the saw the feel of a professional grade instrument.

6. Precise

Accuracy adjustments are made easier with dual front bevel scales for enhanced permeability.

7. Quiet

It is likewise silent since Makita utilize a fixed gearbox to exchange power to the blade rather than a belt

8. Linear Ball Bearings

It has select six linear metal rollers.

9. Laser

The LS1016L has a worked in laser that ensures cuts are straight and genuine.

Pros:

  • Exceptionally accurate with a smooth action.
  • The stock blade is excellent quality.
  • The saw is quiet.
  • The soft begin is excellent.

Requires insignificant calibration right out of the box.

Cons:

A few clients complain about the quality of the provided manual/directions about the quality and size of images.

FAQs:

What makes Makita LS1016L 10-Inch unique?

The Makita LS1016L 10-Inch Dual Slide Compound Miter saw has been touted as having the capacity to slice through wood like a hot blade through butter. The saw arrives calibrated so you can get on with a project faster. When acquiring a miter saw one is occupied with accuracy, usability, compactness and reliability. This saw has it all.

LAST THOUGHTS

The Makita LS1016L 10 inch reduced saw can complete the bigger projects where 12-inch miter saws were frequently expected. The saw has a removable four rail protector framework that takes into consideration an assortment of blends of adjustments of the upper and lower levels. The changes are made efficiently and rapidly, and the cutting action of the saw is consistently smooth and repeatable accuracy. The saw is justified regardless of its cost. The trustworthiness and exactness cuts give the Carpenter a chance to be satisfied with the quality of the cuts and the simplicity of completion of the project. The consistency of accuracy spares valuable time at the job site.

The Makita LS1016L worked in laser helps make exactness cutting easier and accurate. When you utilize this saw you would have a miter go from 0 – 52 degrees to one side and 0 – 60 degrees to the right. The saw weighs less and is more portable than its competitors. It dual sliding compound miter saw has a one stage process for blade changing, again sparing time. The innovative four steel framework requires less space than the opposition’s dual sliding miter saw and upgrades the stability of the saw. The expanded balance takes into account more control with less exertion. The trigger switch additionally takes into account faster and easier control. The blade guard framework is transparent (clear), and this makes it conceivable to have a more prominent permeability of the line of cut and the blade.

3. DEWALT DW713 15 Amp 10-Inch Compound Miter Saw

The DEWALT DW713 15 Amp 10-Inch Compound Miter Saw is a high quality user friendly mitre saw otherwise called a drop saw, manufactured in Taiwan by DEWALT. It is a power tool utilized to make speedy, precise crosscuts in a workpiece at a required angle. The miter saw is usually utilized for cutting of embellishments and for trimming purposes. It is a small and convenient saw with a blade size of 10 inches.

As it is a compound miter saw so it has the capacity to turn the blade head to any required angle other than 90 degree. It allows the user to make more complex cuts easily.

Product Features

Power Source:

The product is powered by a 15 Amp motor which provides a no load rotation of 5000 rpm to the blade that helps the saw to make precise cuts very easily. The 15 Amp motor provides an extended power to the cutting blade. The motor is durable and best in this price range.

Blade:

The saw has a 10” diameter blade which is perfect for all kinds of cuts especially wide cuts. This 10″ has plenty of room to cut trim and crown and you can feel the quality of the saw when cutting. The blade has a capacity of 4×4 cross cut at 90 degree and 2×6 bevel cut capacity at 45 degree. It has a horizontal capacity (base board lying flat) of 6 inches. It has a 0-50 left and right miter capacity for a greater versatility and three degree to forty eight degree bevels for great cut capacity.

Weight:

The weight of this compound mitre saw is around 35 lbs, which is very impressive for a powerful saw like this. The product is light weight which makes is easy to use, handle and displace.

Fences:

This product has a tall sliding fence which can support crown-molding vertically 4-1/2-inch and which slides out of the way with ease to make way for bevel cuts. Also the machined base fence offers support for the fence perpendicularity and ensures it is in sync with blade for cutting accuracy. As a result of these fences saw provide smooth and accurate result.

Cam Miter lock:

This product also features a cam miter lock for quick and accurate miter table positioning. There is also the miter detent override that ensures fine adjustment as well as precise miter angles.

Pros:

  •  Miter detents and vernier scale are of very good quality.
  •  Product is powerful but lightweight
  •  This product runs smooth, simple to use, makes mitres easy to perform.
  •  It is a durability and out of the box setup.
  •  Solid construction. Ergonomics. Accuracy. Ease of switching angles.

Cons:

  • The Bevel scale of the saw and pointer are very poor
  • This saw is Incompatible with DWS7085

FAQs

Q: Does the saw have any braking mechanism installed?

A: It stops very quickly once the trigger is released. Yes, it has blade brakes, the blade stops in around 2 or 3 seconds.

Q: Does this DEWAR saw come with a stand or one have to buy it separately?

A: The product does not come up with a stand, if you require a stand you have to purchase it separately.

Conclusion:

The DW713 saw which comes up with a 10” blade and a 15 Amp motor which makes it a very powerful and effective tool; with this power and blade this product can make complex and difficult cuts very easily and effectively. This product is light weight which makes it easy to handle and a
powerful portable tool. It is a user friendly product and perfect for all types of users from amateurs to professionals.

4. DEWALT DWS709 Slide Compound Miter Saw 12-Inch 

Have you been working with a miter saw that hasn’t been giving you the results you want? Maybe it hasn’t been performing as expected? And maybe you feel that production hasn’t been the way you want it to be? Well, you are actually in the right place. Thanks to the makers of the new DEWALT DWS709 Slide Compound Miter saw, 12 inch who have ensured to include hi tech features that will definitely improve your production level. The DEWALT DW709 has been built to offer high power; it’s light in weight and is very easy to work with.

This is due to the high quality materials that have been used by the professionals to build it. This is a saw that will guarantee you longevity and at the same time improve on your production levels. Let us take a look at the features that come with the DEWALT DW709 Slide Compound Miter Saw, 12 inch that will definitely make you consider having one.

Features

1. Light in weight

The DEWALTDWS709 Slide Compound Miter saw has been built with high quality exclusively light materials thus making it easy to move around with. You can always work with the machine from home or even at your work area. Weight really matters when it comes to miters since it reduces the fatigue of moving it around thus saves time.

2. High Power

With the high power capability that comes with the saw you can be sure of accurate cuts. This is made possible due to the fact that you can always adjust the power hence ensuring efficiency during the cuts. The saw is easily adjustable with help of the 13 positive miter detents hence allowing accuracy when it comes to cutting. This in turn plays a big role when it comes to productivity.

3. Durable

A quality machine means it’s built with the best material there is. The DEWALT DW709 has been made using Aluminum and steel thus making it a long lasting machine that can serve you for a very long period of time. Such quality materials make the DW709 hard to tear even if it’s stored for a long duration of time. You definitely don’t want a saw that won’t give you a longer service.

4. Accuracy during cuts

The miter saw comes with high adjustable power and detent plate that ensures accuracy when it comes to cutting wood. The DEWALT DWS709 also bears a miter pointer which is red in color that helps you locate and read miter angles correctly. With the saw there is no room for mistakes at all. You are always sure of what you are doing and this does not only fasten your work but it also saves your time.

5. Compact

The DEWALT DWS709 Slide Compound Meter Saw, 12 Inch doesn’t need too many connections. All you have to do is plug it and make few adjustments on the plate and you are good to go. Being compact means that its makers have ensured to use a lightweight design thus making it easy to use.

Here are the pros and cons of the DEWALT DWS709 Compound Miter Saw, 12 Inch;

Pros

  1. It’s light in weight which makes it user friendly; this is also an added advantage in that it saves you the energy of moving it from one place to another.
  2. Easy to use, thanks to the saw package that comes with a manual script which guides you on the do’s and don’ts during the operation.
  3. The saw is built out of quality materials thus making it safe and long lasting.
  4. The machine is relatively affordable hence making it pocket friendly for you.
  5. It’s efficient when it comes to accurate cutting so you are always sure that you are doing the right job.

Cons

  1. At first the saw might seem hard to operate but once you understand it then you become a pro.

FAQs

Question 1: Can the machine run for 12 straight hours?

Answer: Yes, depending on how well you maintain the saw. Yes it can.

Question 2: How often do you need to service the saw?

Answer: It depends on how often you use it, but it’s always a good routine to keep it on check before you start working with it. This also improves on your safety.

Best Miter Saw For DIY & Home Use

When it comes to the best miter saw for home improvement projects, there are a number of name brands that stand out. They include, but are not limited to: Bosch, DEWALT and Makita.

One of the best reviewed Miter Saw is the Bosch CM10GD 10-inch Dual Bevel Glide Mitre Saw

The CM10GD delivers accurate and controlled cuts to the DIY. It has an Axial-Glide system that provides wider cross cuts, better alignment and smoother glide. It is compact, taking up approximately 10 inches less space versus the traditional sliding miter saw.

Out of the box, it has a 10 inch, 60-tooth carbide tipped saw blade, wrench, work clamp, dust bag and vacuum adapter.

It operates using a powerful 15-amp motor that delivers 4,800 no-load rpm for the professional and DIY alike. Its ergonomic trigger handle has a soft comfortable grip suitable for right or left-handed users. Its bevel lock lever and range selector are in plain sight and users don’t have to reach behind the saw in order to make bevel adjustments.

The DEWALT DWS709

The DWS709 is a 12″ sliding compound miter saw that has a 15 amp motor, stainless steel miter detent plate and cam miter lock for accuracy and durability every time. At just 51 lbs, the DWS709 is lightweight and compact and can be easily transported and stored when not in use. It miters 60 degrees to the right and 50 degrees to the left for increased capacity and its exclusive back fence design cuts lumber up to 2×14 in size, at 90 degrees and 2×10 at 45 degrees.

The Makita LS1221

The LS1221 is a 12-Inch Compound Miter Saw Kit provides DIYers and professional a powerful 15 amp direct drive motor for improved performance. Weighing in at just 37 pounds, the 12-inch saw is easily transportable from site to site. Positive stops at 15, 22.5, 31.6 and 45 degrees on both left and right sides, along with zero make accurate cuts possible. Its 4-1/2″ tall pivoting fence can cut up to 5-1/2″ crown molding and 3-7/8″ x 6″ at 90 degrees.

Makita says that LS1221 is engineered for a broad range of trades including general contractors, professional woodworkers, cabinet installers, finish carpenters and for a variety of applications like decking and flooring and siding.

How to choose a good miter saw for beginners?

If you are working on multiple job sites, then a lighter model might be the way to go. If you want added accuracy, consider a miter saw that is equipped with a laser guide. Ultimately, your purchase will come down to a combination of the features and functionality that best suit your current and future project goals, relatively speaking to the amount of money you have to pay for the piece of machinery. There are a number of great miter saws on the market today but ultimately it is up to you to determine for yourself the best miter saw money can buy.

10 Safety rules and precautions to follow while using miter saws for woodworking & cutting

miter saw safety rules

  1. It is strongly recommended to protect your eyes and ears while you are using saw.
  2. You should not wear loose clothing, gloves or jewelry when you are cutting using a miter saw.
  3. Make sure all guards are properly in-placed and operating, if you found any guard hangs up or slow in return then you should immediately repair it.
  4. To help the movement and visibility try to clean the lower guard on frequent basis.
  5. Keep your fingers and hands clear of the blade by at least 6 inches.
  6. Always use recommended size of blade
  7. Do not cut very small pieces.
  8. If you are using long material then make sure its height is equivalent to saw’s height.
  9. Keep checking tightness of the blade and blade mechanism.
  10. At the time if adjusting blades and guards, make sure saw’s power is locked or unplugged.

Concluding Thoughts

A miter saw is a very handy tool for DIYers and professionals alike. It allows you to accurately cut material to your angle specifications. There are a number of top quality miter saw manufacturers in a very crowded power tool market. While we have introduced five different models in this article, you are encouraged to go to your local hardware store and take a look at their selection of miter saws for yourself. Compare their features, how they feel when you hold the handle, and identify some of their limitations. Most, if not all miter saws will not come with a work bench included with your purchase. Be sure to measure your existing work bench and make sure your miter saw will fit.

LEAVE A REPLY

Please enter your comment!
Please enter your name here